Amazon search

Showing posts with label fix. Show all posts
Showing posts with label fix. Show all posts

Thursday, October 2, 2014

Common Fixes for Sony bravia TVs KDL XBR- Red light blinking CODES!



to reset sony TV 1st unplug all cables from tv and power for 5 minutes but if that reset fails then next is to factory reset by holding TV Remote's "UP" on directional pad while pressing "power" ON THE TV.


Red led light blinks flashes, red light error code troubleshooting Chart,

2 red flashes is bad power board

3 red flashes is bad main or power board

5 red flashes is bad lcd panel connection or internal lcd short- expensive fix

6 red flashes is backlight error check bad main board, power board or inverter boards- unplug one by one to see if tv stays on

7 red flashes is main board over heating

8 red flashes is main board sp prot

11 red flashes is trident IC, bad main board

12 red light flashes is tcon error bad T-con board or bad LCD panel (tv turns off after a minute)

13 red flashing is backlight balance error bad lcd panel or inverter boards (common) or balancer boards on kdl-52v4100 only

14 red flashes is HFR error bad TCON or Bad LCD panel, in this video its bad T-con board.

"how to download update"

Download UPDATES KDL-52W4100 & KDL-52V4100

Sony kdl-52w4100 usb update - http://esupport.sony.com/US/p/model-home.pl?mdl=KDL52W4100&template_id=1&region_id=1&tab=download#/downloadTab

Sony KDL-52v4100 http://esupport.sony.com/US/p/model-home.pl?mdl=KDL52V4100&template_id=1&region_id=1&tab=download#/downloadTab

Wednesday, September 24, 2014

How to fix Plasma TVs repair troubleshooting service guide!


How to fix Plasma TVs repair troubleshooting service guide
If you got tv power but no picture, check Y sustain and y buffer scan drive boards.
Note: "no standby light" on front of tv can be...
bad ac outlet (reset circuit breaker),
bad connection on power-cord, just secure plug
bad power-board, check for stdby 5v or (3.3v on some TVs)
if you have standby volts then lastly bad main logic board.

Bad X or Z sustain board will give you color distortion. 

.

Wednesday, September 10, 2014

How to fix / repair Panasonic tv TH-58PZ800B, TH-58PZ800U, TH-58PZ850U

How to fix / repair Panasonic tv TH-58PZ800B, TH-58PZ800U, TH-58PZ850U
This repair kit will fix your tv power board.


Sunday, August 10, 2014

COMMON LCD TV SERVICE REPAIR PICTURE SCREEN COLORS FIXED



common TV service repair for sony & samsung that have lines in screen, no picture, discolored or distorted video is tcon board.
 

Saturday, July 26, 2014

WHAT Plasma TV BOARD CAUSES NO PICTURE REVIEW

Y-Main Board YSUS Y-Sustain PBA Number: LJ92-01601A PCB Number: LJ41-05905A TV Panel Model: S50HW-YD11 | S50HW-YB04 i suggest getting repair kit, service manual, or just get the y board listed below. y sustain and y buffer boards time to time go bad, capacitors & transistors on heatsink sometimes go bad too. (ymain sustain board and buffer boards displays "scans" the image on tv screen)
 
 

Sunday, November 24, 2013

PS4 BLINKING LIGHT OF DEATH FAILURE FIX, PS4 REPAIR GUIDE!!!

PS4 BLUE or RED BLINKING LIGHT OF DEATH FAILURE FIX!!!
GET UP DATE at website and put on USB drive http://us.playstation.com/support/systemupdates/ps4/index.htm
Call SONY SCEA CUSTOMER TECH SUPPORT SERVICE 1800-345-7669 to get update disc!
New PS4 troubleshoot repair instructions
FIRST- Plug PS4 hdmi cable in all TV's hdmi ports
To Reset PS4 click here- ways to reset PS4 and update PS4 using usb drive
Common troubleshooting steps
Step 1. Call Sony Tech Support to Request Update Disc. 1800-345-7669 
Step 2. check HDMI cable is making contact with port. (check for broken parts/bent pins)
Step 3. Hold power button till PS4 turns off then Disconnect the power cord from the PS4 for 1 minute then reconnect.
Step 4. Turn on TV and select the correct video output for PS4.
Step 5. Connect the Controller to the PS4 Console via cable
Step 6. Press & Hold the 'PS' button on the controller until the Blue light turns Orange.
Step 7. Then Press & Hold PS button (on the controller) again, until the Consoles light turns White.
Step 8. Wait for PS4 to turn on & display picture on TV
[PS4 Factory Reset]
Step 9. Press & Hold Ps button until the console turns off.
step 10. Then press & hold PS button until you hear 2 beeps.
[Service/Safe Mode]

Step11. select restore PS4 and it will Reset PS4 to back to new
step12. some had luck taking out hard drive and turning on ps4 but some gamers also just had a loose connection on hard drive.
step 13. do "Hard reset" Unplug ALL Cables from PS4 for 10 minutes then connect all cables and powercord

old instructions below
FIRST- Plug PS4 hdmi cable in all TV's hdmi ports
1. also check hdmi port for metal pins touching inside ps4 hdmi port
2. hold power button to turn off ps4, unplug powercord of ps4 for 1 minute for hard reset.
3. plug in the ps4 controller to PS4 and Hold PS center controller button till blue light turns orange then Again Hold PS button on controller till PS4 light turns White then wait 20 seconds for PS4 to turn ON and display a picture, make sure you are on the correct TV video input. 
4. "PS4 Restore factory reset" hold PS4 CENTER POWER BUTTON TILL PS4 TURNS OFF, THEN Again HOLD POWER BUTTON TILL YOU HEAR 2 BEEPS TO ENTER "SERVICE MODE" OR "SAFE MODE" from there you should be able to restore reset PS4.
PS4 IS DEFAULTING VIDEO RESOLUTION TO 1080P FULL COLOR AND SOME TVs don't support that. So also try another 1080p hdtv.
5. POP off PS4's top shiny plastic cover check for anything loose like screws secure everything!
6. last return it and get your money back and wait for next generation PS4 comes out or get Xbox one but that needs an online update right out of the box to work.


Tuesday, August 20, 2013

Easy Common Sony TV repair service review

Easy Common Sony XBR TV repair service review NO POWER TURN ON THEN OFF 2 RED LED BLINKING LIGHT NOT WORKING BROKEN BRAVIA LCD

Friday, August 16, 2013

HOW TO FIX PS3 SERVICE - FILE CORRUPTION ERROR MESSAGE

GET USB MEMORY STICK FORMAT FAT32 THEN INSTALL PS3 UPDATE ON IT HERE
http://us.playstation.com/support/systemupdates/ps3/pc_update/index.htm
THEN PLUG IN USB STICK THEN TURN ON PS3 FOLLOW STEPS TO RESTORE PS3 THIS WORKS FOR ME ANY TIME I GET BAD PS3 UPDATE OR CRASHED HARD DRIVE.

Sunday, July 14, 2013

How to Install PS3 usb Update if PS3 Freezes internet Update at Loading

How to Install PS3 usb Update if PS3 Freezes internet Update at Loading
http://us.playstation.com/support/systemupdates/ps3/ PS3 "usb" Update link,
buy USB- memory-drive then format it by right click on "usb-drive icon Format, (file-system) to "fat32" then make 2 folders "ps3" & "update" put ps3 update inside "update" folder which is inside the "ps3" folder but 1st backup your ps3 data to 2nd usb in ps3 system settings. Hope that Helps 8^)