Amazon search

Showing posts with label samsung. Show all posts
Showing posts with label samsung. Show all posts

Monday, September 15, 2014

How to fix Plasma TV no picture or clicking on off

How to fix Samsung Plasma TV no picture or clicking noise. Y sustain main board repair kit! Samsung BN96-06086A Y-Main Board Component Repair Kit.

clicking on off can be from few swollen capacitors in power board but sometimes ICs on y buffer boards short and transistors on y main sustain board can go bad time to time so here's a link to fix that issue. Y sustain board repair kit to fix clicking or no tv picture issues.

Thursday, September 11, 2014

Common DLP TV repair for Toshiba, Samsung HL, Mitsubishi WD models

Common fix for DLP TVs Samsung HL, Mitsubishi WD, Toshiba 57HM167, 65HM167 is DLP chip.
Free Samsung TV fix by repair warranty service tech for DLP models HL-P, HL-R, HL-S, HL-T, see link below. In most DLP TVs the lamp goes out first then sometimes capacitors in power board swell up and color wheel goes bad. Also DLP chip in light engine may go bad time to time, sometimes these parts are covered by extended warranty just go to TV brand website. If you have no picture or dots, shadows on screen then suspect it is bad DLP chip. if TV does not turn on it can be bad power board or main logic board. if the DLP light bulb (dlp lamp) in the back vent is NOT lighting up then DLP lamp is bad, just order a lamp for your tv model and install it by opening the small door on the back panel (lamp just slides out & in) .
http://www.samsung.com/us/dlptvsettlement/

Tuesday, July 29, 2014

UNBOXING SAMSUNG Youtube CAMERA HMX-F90 REVIEW



Top value youtube camera 720p with great indoor recording too and comes with video edit software. Has pause recording and photo while recording.



Saturday, July 26, 2014

WHAT Plasma TV BOARD CAUSES NO PICTURE REVIEW

Y-Main Board YSUS Y-Sustain PBA Number: LJ92-01601A PCB Number: LJ41-05905A TV Panel Model: S50HW-YD11 | S50HW-YB04 i suggest getting repair kit, service manual, or just get the y board listed below. y sustain and y buffer boards time to time go bad, capacitors & transistors on heatsink sometimes go bad too. (ymain sustain board and buffer boards displays "scans" the image on tv screen)
 
 

Tuesday, March 26, 2013

How to program cable tv remote 1056 brighthouse comcast timewarner tv manual codes

1.turn tv on
2.press tv button
3.press and hold setup till led blinks twice
4.press 9_9_1 slowly. led blinks twice
5.press power button
6.press channel up slowly till tv turns off (may take 5 min.s)
7.press setup to save code

Universal remote must have brand new batteries or it might not work.